Made in Colorado

Standing Seam

Nail Strip Standing Seam Panelnail-strip

Nail Strip Standing Seam provides easy installation, very high wind loads and waterproofing, in a wide array of colors and material types, delivering a unique option for homeowners.

This hidden fastener panel is manufactured in an 1” & 1.5” seam height and it is most readily available in widths of 15.8” & 14.8”. The width is dependent upon the height of the seam that is spec’d for the job, however this panel can be made into many different widths if required.

Most Common Use: Residential
Minimum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: Hidden Fastener, On Site Rollforming, Architectural Appearance, High Wind Loads, Many Material Options, Easy Installation

fade-bottom

Snap Lock Standing Seam Panelsnap-lock

The Snap Lock panel has been an industry standard for many years and for good reason. This panel provides a lifetime of protection against all of mother natures elements.

This true standing seam panel is manufactured in an 1” & 1.5” seam height. It is most commonly manufactured in widths of 16.9” & 15.4”. The width is dependent upon the height of the seam that is spec’d for the job, however this panel can be made into many different widths if required.

Most Common Use: Residential
Minimum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: True Hidden Fastener Clip System, On-Site Rollforming, Architectural Appearance, High Wind Loads, Many Material Options.

fade-bottom

Mechanical Lock Panelmechanical-lock

Mechanical lock is a very dynamic panel system. This panel can be formed into a radius or convex curvature and provides the highest level of protection against wind and moisture that Standing Seam can offer.

This hidden fastener panel is manufactured in an 1” & 1.5” seam height. It is most readily available in widths of 17.25” & 16.3”. The width is dependent upon the height of the seam that is determined for the job, however this panel can be made into many different widths if required.

Most Common Use: Commercial & Residential
Minimum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: True Hidden Fastener Clip System, On-Site Rollforming, Architectural Appearance, Superior Wind Loads, Many Material Options, Ability to Convex and Radius Panels.

Exposed Fastener

3’ Tuf Rib Panel3ft_tuf_rib

This is Flatiron Steel’s most economical metal roofing system. With clean and traditional lines, this panel delivers quality and versatility that is unmatched for the price by any other 40-year roofing material in the industry.

This exposed fastener panel covers 36” after overlap with 9” on center ribs that are ¾” in height. Formed at Flatiron Steel’s facility, this panel is cut to length and available in just 1-2 days.

Most Common Use: Residential and Agricultural
Most Appropriate Roof Slopes: 3:12 or Greater
Attributes: Economical, Easy to Install, Fast Turnaround, Versatile, For Use on Open Purlins or Solid Substrate, Manufactured With an Anti-Siphon Groove Overlap System.

fade-bottom

3’ Delta Rib Panel3ft_delta_rib

The Delta Rib Panel offers a conventional metal roofing experience. Based on older design styles,the 3’ Delta Rib, has a trapezoidal shaped major rib that is, 9” on center, ¾” height, and 36” wide after overlap. This panel is very economical, can be cut to length, and usually available in 5-10 business days.

Most Common Use: Residential and Agricultural
Most Appropriate Roof Slopes: 3:12 or Greater
Attributes: Economical, Easy to Install, Traditional Design, Versatile, For Use on Open Purlins or Solid Substrate.

fade-bottom

7/8” Corrugated Panel7-8in_corrugated

This unique corrugated panel design can give a project a distinctive and refined appearance. The 7/8” Corrugated Panel has a single overlap system for vertical applications and a double overlap system for roofing applications, both are accompanied by a waterproofing anti-siphon groove for excellent water tightness. This panel is cut to length, made in many gauges, colors, and material types including Cor-Ten, and is available in 5-10 business days.

Most Common Use: Residential and High-End Agricultural
Minimum Roof Slope: 3:12
Attributes: Architectural Design, Anti-Siphon Groove, Can be Made in Weathering Steel and many other materials and gauges.

fade-bottom

2 ½” Corrugated Panel2-5in_corrugated

This economical corrugated panel is perfect for interior and exterior applications. The 2 ½” Corrugated Panel has a single overlap system for vertical applications and a double overlap system for roofing applications. It is made in lightweight 28 gauge material, can be cut to length, and ready in 5- 10 business days. The 2.5” corrugated is commonly used as a roofing application, as well as interior applications for garages, underneath patio’s, and custom design elements. (Please view Gallery)

Most Common Use: Residential (interior and Exterior)
Minimum Roof Slope: 3:12
Attributes: Lightweight, Economical, Sleek design

Other

Soffit Panelsoffit (Perforated or Solid)

This hidden fastener panel system is similar in look and design to tongue and groove wood paneling. Soffit is used on the underside of roof overhangs, on interior ceilings, or porch overhangs. This panel is unique because it can be produced in many different material types including copper and is a great element to an interior design project.

Most Common Use: Residential and Agricultural (Interior and Exterior).
Minimum Roof Slope: Not designed for use on a traditional roofing surface.
Attributes: Tongue and groove design element, Can be vented or solid.