Made in Colorado

Commercial Metal Roofing Panels & Materials

Standing Seam

Nail Strip Standing Seam Panelnail-strip

Nail Strip Standing Seam provides easy installation, very high wind loads and waterproofing, in a wide array of colors and material types, delivering a unique option for homeowners.

This hidden fastener panel is manufactured in an 1” & 1.5” seam height and it is most readily available in widths of 15.8” & 14.8”. The width is dependent upon the height of the seam that is spec’d for the job, however this panel can be made into many different widths if required.

Most Common Use: Residential
Miniumum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: Hidden Fastener, On Site Rollforming, Architectural Appearance, High Wind Loads, Many Material Options, Easy Installation

fade-bottomSnap Lock Standing Seam Panelsnap-lock

The Snap Lock panel has been an industry standard for many years and for good reason. This panel provides a lifetime of protection against all of mother natures elements.

This true standing seam panel is manufactured in an 1” & 1.5” seam height. It is most commonly manufactured in widths of 16.9” & 15.4”. The width is dependent upon the height of the seam that is spec’d for the job, however this panel can be made into many different widths if required.

Most Common Use: Residential
Miniumum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: True Hidden Fastener Clip System, On-Site Rollforming, Architectural Appearance, High Wind Loads, Many Material Options.

fade-bottomMechanical Lock Panelmechanical-lock

Mechanical lock is a very dynamic panel system. This panel can be formed into a radius or convex curvature and provides the highest level of protection against wind and moisture that Standing Seam can offer.

This hidden fastener panel is manufactured in an 1” & 1.5” seam height. It is most readily available in widths of 17.25” & 16.3”. The width is dependent upon the height of the seam that is determined for the job, however this panel can be made into many different widths if required.

Most Common Use: Commercial & Residential
Miniumum Roof Slope: 1” Seam (3:12) 1.5” Seam (1.5:12)
Attributes: True Hidden Fastener Clip System, On-Site Rollforming, Architectural Appearance, Superior Wind Loads, Many Material Options, Ability to Convex and Radius Panels.

Exposed Fastener

PBR Panelpbr-panel

A sturdy commercial grade product that can free-span between purlins up to 5 feet. The PBR panel has a full under lap purlin leg and a five-degree over bend on the overlap creating an anti-siphon groove for a waterproof system at low slopes. This Panel is made standard in 26 gauge, can be cut to length, and is available in 1-2 day’s.

Most Common Use: Commercial
Minimum Roof Slope: 1:12
Attributes: Low Slope Requirements, Fast Turnaround, Large Free-Span potential.

fade-bottom7/8” Corrugated Panel7-8in_corrugated

This unique corrugated panel design can give a project a distinctive and refined appearance. The 7/8” Corrugated Panel has a single overlap system for vertical applications and a double overlap system for roofing applications, both are accompanied by a waterproofing anti-siphon groove for excellent water tightness. This panel is cut to length, made in many gauges, colors, and material types including Cor-Ten, and is available in 5-10 business days.

Most Common Use: Residential and High-End Agricultural
Minimum Roof Slope: 3:12
Attributes: Architectural Design, Anti-Siphon Groove, Can be Made in Weathering Steel and many other materials and gauges.

Facebook

Energy Star

Testimonial

"I highly recommend the services provided by Flatiron Steel. They are not just a metal shop, they are professionals in all respects to the metal industry and customer service."

- Bill Goldsberry
Gold Roofing, Inc.

» Read More

Mercury 100